Run in DOS-MODE
Moderator: DosItHelp
Run in DOS-MODE
Know someone point me to some site that has a program that runs in DOS mode to detect the hardware ids eg: dvd drive, hard drive, etc? There is one called Devcon, but it only runs under Windows ...
Thank you!
Thank you!
Re: Run in DOS-MODE
These are two MSDOS hardware information programs.
If you can't find them then let me know and I'll dig them up from an old cdrom.
Hwinfo
PC-Config
If you can't find them then let me know and I'll dig them up from an old cdrom.
Hwinfo
PC-Config
Re: Run in DOS-MODE
Thanks for help!
I found it http://www.hwinfo.com/download32.html correct?
I try run it tomorrow in my work!
I found it http://www.hwinfo.com/download32.html correct?
I try run it tomorrow in my work!
Re: Run in DOS-MODE
Do you want to run this in MSDOS with older hardware?
That version of HWinfo seems to be for Windows.
That version of HWinfo seems to be for Windows.
Re: Run in DOS-MODE
Hi foxdrive. I want to run in dos mode (dos 7.1v) to get id of any hardware plugged on my motherboard... If you have this tool, please share it!!
Thanks in advance.
Thanks in advance.
Re: Run in DOS-MODE
Here it is, direct from cdrom. You have to scan it for malware.
It may not do what you expect as it is from 1997 and will not have updated definitions.
https://www.yousendit.com/download/QlVq ... QnVwSHNUQw
It may not do what you expect as it is from 1997 and will not have updated definitions.
https://www.yousendit.com/download/QlVq ... QnVwSHNUQw
Re: Run in DOS-MODE
Thanks foxdrive, today i use this tool and in next time I'll post here! Thanks!
Re: Run in DOS-MODE
Hi foxidrive. I've tested the HWinfo and run fine. however, i can't pick up the info generated by the sw. For example: One command of DOS → systeminfo
If I run this command with > parameter I get into a .txt file all information saved.
systeminfo > pc.log
I needed that to solve my problem
PC-Config can help-me with this issue? Thanks!
If I run this command with > parameter I get into a .txt file all information saved.
systeminfo > pc.log
I needed that to solve my problem
PC-Config can help-me with this issue? Thanks!
Re: Run in DOS-MODE
I don't know. If you describe your problem then maybe someone can help.
PC-Config is here.
http://majorgeeks.com/PC_Config_d334.html
PC-Config is here.
http://majorgeeks.com/PC_Config_d334.html